Accessory : groupe-ric.com : Machines et pièces mécaniques spéciales à Lille Nord 59 - vérins hydrauliques, verins speciaux

With separate pump or one-piece jack with toe 5T, 10T, 20T.

Heavy Industries and Mines

Polyacetal ROBUR fittings are designed in plastic "Polyacetal"

Each clamp includes: - 2 half-collars Rep. 1, cast iron, designed to ensure the hose clamp. - 2 intermediate parts Rep. 2, cast iron, avoiding the pinching of the hose when tightening. - 2 bolt assembly Rep. 3.

Each clamp includes: - 2 half-collars Rep. 1, cast iron, designed to ensure the hose clamp. - 2 intermediate parts Rep. 2, cast iron, avoiding the pinching of the hose when tightening. - 2 bolt assembly Rep. 3.

Pneumatic panel with LECQ distributor valves

SERRA heads, type KFP / Z Standard design with tie rod mounting for standard cylinders ISO 6431 / VDMA cylinders standard mounting

The pneumatic micro distributors are 3 / 2 (3 holes - 2 positions) small cross-section of passage, equipped with a manual or mechanical.

The propeller meter (or turbine) are used for measuring instantaneous flow rates, volumes or regulation of any kind of liquid such as oils, water, fuel, liquid food, etc..

The unidirectional flow limiters allow the gradual adjustment of the flow in one direction while the flow is free in the other direction.

Electro-distributors pneumatic valves 1 (type J) or 2 (Type JJ) stable positions - Manifold mounting

Electro-distributors pneumatic valves 2 stable positions - In-line mounting.

Electro-distributors pneumatic valves - in-line mounting.

Electro-Distributors pneumatic valve 5/2 and 5/3 on manifold mounting

Pneumatic Distributors Valve, in-line mounting

Pneumatic distributors valves In-line mounting Pressure range: 2 to 10 bar Temperature: -10°C to 80°C Control devices: roller lever single or double

Pneumatic distributors slide 5/5 and 2/3 - manifold mounting - controls muscle

Check valves, circuit selectors, silencers